Goulds GT20 Irrigator - 2 hp Irrigation Pump

FEATURES: Self-Priming Design: Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe. Serviceable: ? Back pullout design allows disassembly of pump for service without disturbing piping. ? Two compartment motor for easy access to motor wiring and replaceable components. Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance. Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant. Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on. Casing: Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain. Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage. Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry. APPLICATIONS: Specifically designed for the following uses: ? Lawn sprinkling ? Irrigation ? Air conditioning systems ? Heat pumps ? Water transfer ? Dewatering GENERAL GT SERIES SPECIFICATIONS Pump: ? Pipe connections: 1½" NPT suction 1½" NPT discharge ? Capacities: to 110 GPM at 5 foot suction lift ? Heads: to 128 feet ? Reprime capabilities: to 25 feet suction lift ? Maximum working pressure: 125 PSIG ? Maximum water temperature: 140° F (60° C) ? Rotation: clockwise when viewed from motor end. Motor: ? NEMA standard open drip proof ? 60 Hz, 3500 RPM ? Stainless steel shaft ? Single phase: ¾-1½ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset.